Welcome To Visit Xuzhou Aosen Slewing Bearing Manufacturing Co., Ltd. Website!
WE SHOULD HOE TO CLEANING THE SLEWING BEARING
The slewing bearing usually consists of worm, slewing bearing, shell, motor and other components. Because core part USES the rotary bearing, can also carry axial force and radial force and overturning moment. The form a lot, but the structure of basic same. Since there are so
many industries are in the use of slewing bearing, then how should we in use of cleaning, slewing bearing/wheel bearings cleaning rough washing and fine washing, can be put in use at the bottom of the container and on the metal frame. Coarse, washing oil using a brush to remove grease or adhesive. If at this time in oil bearing, pay attention to the rolling surface due to foreign bodies such as damage. Commonly used cleaning agent for neutral aqueous diesel or kerosene, according to the need to sometimes use warm lye, etc. No matter use which kinds of detergent, often should filter clean. Rotary bearing cage with monolithic, sectional and isolation block structure. The integral and sectional cage with 20 # steel or ZL102 aluminum alloy casting.
Slewing bearing sealing ring made of material with ding eyes of oil resistant rubber. How to properly clean rotary bearing/wheel bearing:
1, the bearing will be removed when check, use methods such as photography first and then record the appearance.
2, in addition, to confirm the amount of residual lubricant and lubricant sampling, and then clean the bearing.
3, the bearing cleaning rough washing and fine washing, can be put in use at the bottom of the container and on the metal frame.